Skip to content

Can't find the right product configuration? No worries, this is only a small snippet of our product portfolio. Simply contact us through the contact form below or by clicking here.

CANEO series10 Stainless Steel

  • Housing made of robust stainless steel
  • Water-resistant
  • Configuration via IO-Link
  • Symbols illuminated
Maintained signal (signal duration = touch)Maintained signal (signal duration = touch)Maintained signal (signal duration = touch)momentary (300ms per touch)momentary (300ms per touch)momentary (300ms per touch)Toggle (change of state per touch)Toggle (change of state per touch)Toggle (change of state per touch)
B00 - Custom Symbol (Illuminated)B00 - Custom Symbol (Illuminated)B00 - Custom Symbol (Illuminated)B10 - StartB10 - StartB10 - StartB11 - StopB11 - StopB11 - StopB12 - On/OffB12 - On/OffB12 - On/OffB13 - ResetB13 - ResetB13 - ResetB14 - ONB14 - ONB14 - ONB15 - Arrow Up/DownB15 - Arrow Up/DownB15 - Arrow Up/DownB20 - Number 0B20 - Number 0B20 - Number 0B21 - Number 1B21 - Number 1B21 - Number 1C00 - Custom Symbol (Non Illuminated)C00 - Custom Symbol (Non Illuminated)C00 - Custom Symbol (Non Illuminated)C10 - StartC10 - StartC10 - StartC11 - StopC11 - StopC11 - StopC12 - ON/OFFC12 - ON/OFFC12 - ON/OFFC13 - Reset GreenC13 - Reset GreenC13 - Reset GreenC14 - ON GreenC14 - ON GreenC14 - ON GreenC15 - ON RedC15 - ON RedC15 - ON RedC16 - ON BlackC16 - ON BlackC16 - ON BlackC17 - Start blackC17 - Start blackC17 - Start blackC18 - Stop blackC18 - Stop blackC18 - Stop blackC19 - Reset blackC19 - Reset blackC19 - Reset blackC20 - No SymbolC20 - No SymbolC20 - No SymbolC30 - Number 0C30 - Number 0C30 - Number 0C31 - Number 1C31 - Number 1C31 - Number 1
BlueBlueCANEOCANEOCustomcustom LED ColorGreenGreenMagentaMagentaOrangeOrangeRedRedYellowYellow
BlueBlueCANEOCANEOCustomCustomGreenGreenMagentaMagentaOrangeOrangeRedRedYellowYellow
Clear

Description

Supply voltage DC 24 V (8,4…32 V)
Output signal Static-Dynamic
approx. 300 ms (dynamic)
Dynamic
Switch Surface Material Polycarbonate (PC)
Housing Material Polycarbonate (PC)
Dimensions Ø30mm (1.18 inch)
Wire count 5-pole
Connection M12
Activation Cycles > 100 Mio.
Operating temperature  -30 °C (-22 °F)…+65 °C (149 °F)
Mounting method Mounting hole 22,5 mm (0.89 inch)
IP protection level Front IP69K
IK protection level IK08
Communication interface IO-Link V1.1
Output (PNP-NC / NPN-NO)
(PNP-NO / NPN-NC)
Certifications CSAuS (UL)

Downloads

Technical Data

General Info

 

Additional information

Weight 1.2 oz
Dimensions 3 × 2.3 × 2.6 in
Housing Material

Stainless Steel

Switch Function

Maintained signal (signal duration = touch), momentary (300ms per touch), Toggle (change of state per touch)

Connector

M12 5-Pin

Symbols

B00 – Custom Symbol (Illuminated), B10 – Start, B11 – Stop, B12 – On/Off, B13 – Reset, B14 – ON, B15 – Arrow Up/Down, B20 – Number 0, B21 – Number 1, B22 – Number 2, B23 – Number 3, B24 – Number 4, B25 – Number 5, B26 – Number 6, B27 – Number 7, B28 – Number 8, B29 – Number 9, B30 – Number 10, B31 – Number 11, B32 – Number 12, B33 – Number 13, B34 – Number 14, B35 – Number 15, B36 – Number 16, B37 – Number 17, B38 – Number 18, B39 – Number 19, C00 – Custom Symbol (Non Illuminated), C10 – Start, C11 – Stop, C12 – ON/OFF, C13 – Reset Green, C14 – ON Green, C15 – ON Red, C16 – ON Black, C17 – Start black, C18 – Stop black, C19 – Reset black, C20 – No Symbol, C21 – Green, C22 – Red, C23 – Black, C24 – Blue, C25 – Yellow, C29 – Arrow Up/Down, C30 – Number 0, C31 – Number 1, C32 – Number 2, C33 – Number 3, C34 – Number 4, C35 – Number 5, C36 – Number 6, C37 – Number 7, C38 – Number 8, C39 – Number 9, C40 – Number 10, C41 – Number 11, C42 – Number 12, C43 – Number 13, C44 – Number 14, C45 – Number 15, C46 – Number 16, C47 – Number 17, C48 – Number 18, C49 – Number 19

LED Color Idle-State (Pre-Press)

Blue, CANEO, Custom, Green, Magenta, Orange, Red, Yellow

LED Color activated state (Post-Press)

Blue, CANEO, Custom, Green, Magenta, Orange, Red, Yellow

LED Function

automatic (LED1 & LED2 controlled automatically), semi-automatic LED1: manually, LED2: automatically), manual (LED1 & LED2 controlled manually)

Switch output

PNP-NO, PNP-NC, NPN-NO, NPN-NC, IO-LINK

Videos

Introduction Video

Stress Test Video V2

Support

IODDfinder

Go to IODDfinder CANEO series10

Download the IODD File

GET IN TOUCH