Can't find the right product configuration? No worries, this is only a small snippet of our product portfolio. Simply contact us through the contact form below or by clicking here.
CANEO series10 HYGIENIC
- Robust stainless steel housing
- FDA approval, EU regulation 10/2011, DIN EN 1672-2
- EHEDG Hygiene Certification (in process)
- Configuration via IO-Link
- Water-resistant
Description
| Supply voltage | DC 24 V (8,4…32 V) | |
| Output signal | Static-Dynamic approx. 300 ms (dynamic) Dynamic |
|
| Switch Surface Material | Polycarbonate (PC) | |
| Housing Material | Stainless Steel | |
| Dimensions | Ø30mm (1.18 inch) | |
| Wire count | 5-pole | |
| Connection | M12 | |
| Activation Cycles | > 100 Mio. | |
| Operating temperature | -30 °C (-22 °F)…+65 °C (149 °F) | |
| Mounting method | Mounting hole 22,5 mm (0.89 inch) | |
| IP protection level | Front IP69K | |
| IK protection level | IK08 | |
| Communication interface | IO-Link V1.1 | |
| Output | (PNP-NC / NPN-NO) (PNP-NO / NPN-NC) |
|
| Certifications |
|
Downloads
Technical Data
series10 Hygienic Steel 3D Data
CANEO series10 Hygienic Datasheet
CANEO series10 User Manual
General Info
CANEO series10 Flyer
Application Pictures
Videos
Introduction Video
Stress Test Video V2
Additional information
| Weight | 1.2 oz |
|---|---|
| Dimensions | 3 × 2.3 × 2.6 in |
| Housing Material | Stainless Steel |
| Switch Function | Maintained signal (signal duration = touch), momentary (300ms per touch), Toggle (change of state per touch) |
| Switching Output | IO-Link, NPN-NC, NPN-NO, PNP-NC, PNP-NO |
| Symbols | B00 – Custom Symbol (Illuminated), B10 – Start, B11 – Stop, B12 – On/Off, B13 – Reset, B14 – ON, B15 – Arrow Up/Down, B20 – Number 0, B21 – Number 1, B22 – Number 2, B23 – Number 3, B24 – Number 4, B25 – Number 5, B26 – Number 6, B27 – Number 7, B28 – Number 8, B29 – Number 9, B30 – Number 10, B31 – Number 11, B32 – Number 12, B33 – Number 13, B34 – Number 14, B35 – Number 15, B36 – Number 16, B37 – Number 17, B38 – Number 18, B39 – Number 19, C00 – Custom Symbol (Non Illuminated), C10 – Start, C11 – Stop, C12 – ON/OFF, C13 – Reset Green, C14 – ON Green, C15 – ON Red, C16 – ON Black, C17 – Start black, C18 – Stop black, C19 – Reset black, C20 – No Symbol, C21 – Green, C22 – Red, C23 – Black, C24 – Blue, C25 – Yellow, C29 – Arrow Up/Down, C30 – Number 0, C31 – Number 1, C32 – Number 2, C33 – Number 3, C34 – Number 4, C35 – Number 5, C36 – Number 6, C37 – Number 7, C38 – Number 8, C39 – Number 9, C40 – Number 10, C41 – Number 11, C42 – Number 12, C43 – Number 13, C44 – Number 14, C45 – Number 15, C46 – Number 16, C47 – Number 17, C48 – Number 18, C49 – Number 19 |
| LED Color Idle-State (Pre-Press) | Blue, CANEO, Custom, Green, Magenta, Orange, Red, Yellow |
| LED Color activated state (Post-Press) | Blue, CANEO, Custom, Green, Magenta, Orange, Red, Yellow |
| LED Function | automatic (LED1 & LED2 controlled automatically), semi-automatic LED1: manually, LED2: automatically), manual (LED1 & LED2 controlled manually) |
| Connector | M12 |
| Mounting Type | Through Hole |
| Hole Pattern | ⌀22.5mm (0.89") |
| Operating Surface | ⌀17.80mm (0.70″) |
| Product Size | ⌀32.4mm (1.28″) |
