Skip to content



The SENSORswitch CHT51 is designed to be applied, via high-grade adhesive tape, on insulated glass (double-glazed glass). Constructed for two-sided operation and switch by a light touch on the pane of glass. On that score, they are suitable for applications from the inside and outside of a vehicle or building with double-glazed glass; As installation and application require no holes to be drilled in the pane.

CHT51 is suitable for the high-frequency, continuous service required in passenger transport and building technology. Comes with Optical Feedback via 16 brilliant LEDs, and the outer ring can be equipped with Braille and raised pictograms (according to the requirements of TSI-PRM for people with limited mobility).

CAPTRON can provide individual advice to enable you to choose the perfect product from the CHT51 series for the required specifications and applications. Contact us: CAPTRON service.


Important Properties

  • Adhesive mounting
    No screws required.
  • Switching through double glass and direct touch
    No need to drill holes in the panes.
  • Two-sided control
    Suitable for both inside and outside.
  • Feedback
    Visual feedback through 16 LEDs.
  • Shock-resistant
    The sensor cannot be destroyed by lighter flames or severe blows.
  • 100 % water & oil-proof - IP69K
    The sensor is completely sealed in cast resin.
  • Durable service life
    More than 100 million operation cycles (transistor output).
  • Accessibility
    Braille and raised chevrons on the colored cover ring, 25 cm² operating surfaces.
  • TSI-PRM certified (depends on model)
    By directive 1300/2014.