Skip to content

CHT7 SERIES

Description

The SENSORswitch CHT7 is designed for adhesive mounting on outside glass and walls. Installation/application of CHT7 does not require holes to be drilled through the glass pane and wall. The field of application extends over traffic engineering and building technology. The SENSORswitch is equipped with Optical (16 Brilliant LEDs) and Tactile Feedback via optional Vibration. Without any mechanical moving parts, CHT7 is able to achieve a lifecycle of 100 million operation cycles. For people with limited mobility, the SENSORswitch is available with Braille or raised symbols at the outer and cover ring.

CAPTRON can provide individual advice to enable you to choose the perfect product from the CHT7 series for the required specifications and applications. Contact us: CAPTRON service.

Downloads

Important Properties

  • Adhesive mounting
    No screws are required.
  • Touch Control
    A high ease of use, no force required to activate.
  • One-sided control
    Used on the inside only.
  • Feedback
    Visual and tactile signals through 16 LEDs and Vibration (optional).
  • Shock-resistant
    The sensor cannot be destroyed by lighter flames or severe blows.
  • 100% Water & Oil-Proof - IP69K
    The sensor is completely sealed in cast resin.
  • Durable service life
    More than 100 million operation cycles (transistor output).
  • Accessibility
    Braille and raised chevrons on the colored cover ring, 25 cm² operating surfaces.
  • TSI-PRM certified (depends on model)
    By directive 1300/2014.

PRODUCTS